Standard Bursting Disk Holder

Series SH-F / SH-Z / SH-U
for metal bursting disks of the SH / SZ / SU series

The standard bursting disk holders SHF, SHZ and SHU are the standard holders necessary for the installation of our metal bursting discs.

Optionally, the STRIKO pre-torqued holders may be used for these bursting disks. Both are installed with seals between the flange and holder, or alternatively with a burst or leakage sensor between flanges. By tightening the flange screws, the metallic seal is reliably produced between the bursting disk and the holder inlet part.

Design examples

SHU inlet part

With rupture disc SU C

With holder on outlet part

Specification