Full Metal Burst Indicator SVT AM
The SVT AM full-metal burst indicator is intended for high temperatures and aggressive media, with material and seal selection to suit the application. The original datasheet specifies −30°C to +370°C.
Service description
The alarm is delivered as a complete ready-to-install package with seals and connecting cables. It is of course fit for use for DIN, ANSI and JIS flanges – and can be configured with other seals depending on the use scenario. The metal membrane can be manufactured from stainless steel 1.4310, Hastelloy C276, tantalum or silver, depending on each use case and necessity.
Advantages in the application
- Use in high temperatures up to +370°C, with suitable seals
- High corrosion resistance through special materials
- Quick identification of a malfunction
- Simple assembly
- Maintenance-free
- Available in nominal widths DN 25 to DN 600
- In every system can be combined with metal and graphite burst seals, also with bursting discs from other manufacturers
- Can be also used with bursting discs that can be attached without holder between the flanges.
- Retro-fitting possible thanks to low installation height of 5mm.
- The alarm is a separate component and independent of the burst disc
Note about ATEX
The manufacturer’s ATEX note and historical standards references are on page 4 of the original datasheet (August 2012).
Configure Full Metal Burst Indicator SVT AM
Choose the installation options and add your application details. This is an enquiry selection; Sightflow will confirm the final specification. Fields marked * are required.